topic Re: Pro camera will not work after firmware update in Arlo Pro

Pro camera will not work after firmware update

Retired_Member — Thu, 08 Oct 2020 15:10:44 GMT

After recharging one of my eight Arlo Pro/2 cameras and updating the firmware, I am left with a brick.

The camera is entirely unresponsive. I have tried to remove it from my base station and it cannot be added back on. If I plug the supplied charger in, I get a constant blue light for a second or two. Then I get an amber light which flashes twice, and then repeats every so often.

The Sync button on the camera has no response whether I use the battery or not. The camera has bricked. Very unhappy.

Re: Bricked!

jguerdat — Wed, 30 Sep 2020 14:53:39 GMT

That's what warranties are for. Use the Contact SUpport link at the bottom here.

Re: Bricked!

Retired_Member — Thu, 01 Oct 2020 00:23:19 GMT

Yes you'd think so. I opened a case several days ago and I haven't had a response. So I'm left with no choice but to seek advice here to try ang get up and running again, even though I see other people have had the same issue but also with no answers. I will continue to wait to hear from Arlo...

Re: Bricked!

jguerdat — Thu, 01 Oct 2020 13:00:21 GMT

I wouldn't wait - keep using the support system to get a response. No idea why it's so painful but keeping going on your end would be the best solution.

Re: Bricked!

ShayneS — Thu, 01 Oct 2020 17:56:22 GMT

HI @Retired_Member

May I ask for your case number you have open with support?

Re: Bricked!

Retired_Member — Sat, 03 Oct 2020 23:35:41 GMT

Sure, it's 41962633.

I received a response but the suggestions from Arlo are things that I've already tried, to no avail. The Sync button does not do anything anymore so I can't put the camera into "discover" mode. Nothing changes with power/no power, next to base/away from base, battery/no battery etc. I've tried all the combinations, nothing's happening.

THanks

Re: Bricked!

Retired_Member — Thu, 08 Oct 2020 02:52:04 GMT

I don't know why someone changed the name of this thread. I thought "Bricked!" summed it up quite well.

To the person who did change the name of this thread, it's wrong. The camera didn't brick after a base station firmware update. It changed after the camera firmware was updated.

Lastly, the one representative from Arlo who contacted me has left, and after explaining the situation again to the new person, I'm still waiting on a reply. So no solutions yet.

Re: Bricked!

ShayneS — Thu, 08 Oct 2020 15:52:46 GMT

Hi @Retired_Member

I have escalated your case & your escalations number is 41984258. Someone from the support team will be reaching out to you as soon as possible.

Re: Bricked!

Retired_Member — Fri, 09 Oct 2020 00:02:44 GMT

Thank you

Re: Pro camera will not work after firmware update

danielz99 — Tue, 13 Oct 2020 03:23:38 GMT

I have the same problem too ! I just bought the modelVMS4330P not long ago and updated the Station firmware and boom ! camera not snycing and I tried to restart everything and even forget the base station and I can't connect it back HELP !

Re: Pro camera will not work after firmware update

ShayneS — Tue, 13 Oct 2020 16:07:24 GMT

Hi @danielz99

Please contact the Support Team to further investigate this issue. You will find several options for contacting support in the provided link. Arlo Tech Support

Re: Pro camera will not work after firmware update

MovingForward — Wed, 28 Oct 2020 21:57:45 GMT

I have the same problem with all 5 of my cameras after the firmware update in Sept. My cameras have been pretty much useless since. If I haven't passed the 90 days return policy at Costco I would have return the product.

Re: Pro camera will not work after firmware update

ShayneS — Thu, 29 Oct 2020 15:59:03 GMT

Hi @MovingForward

Can you please provide more detail regarding the issue you are experiencing?

Re: Pro camera will not work after firmware update

jj77536 — Wed, 04 Nov 2020 16:10:24 GMT

I have tried to chat with support four times and they keep closing the chat box. I have five cameras and four have stopped working since the firmware update. The only camera that still works is different in the hardware number. It is a H4 while all the others are H3 (not sure if that is an why one still works). Regardless I need a fix or someway to reverse the firmware update so the cameras are usable. Failing that I will post what has happened on Best Buy and Amazon and find a camera system that works. If anyone has found a fix please let me know. Thanks..

Re: Pro camera will not work after firmware update

jj77536 — Mon, 09 Nov 2020 03:51:02 GMT

Thank you Arlo Support! All the cameras are up and working!

Re: Pro camera will not work after firmware update

Bryanweinstein — Sat, 14 Nov 2020 00:23:29 GMT

@jj77536 what did they tell you to correct the issue?

Re: Pro camera will not work after firmware update

jj77536 — Sun, 15 Nov 2020 00:58:23 GMT

Really not sure.. support told me that all cameras were visable, I logged in and everything was working...

Re: Pro camera will not work after firmware update

Jarhead82 — Sat, 10 Apr 2021 21:35:06 GMT

I have the same issue did firmware upgrade now all three cameras will not charge despite having original charger cord and plug. I tried calling the Australian support number and call centre not active. Logged a case online heard nothing. I am out of the statutory warranty period however as this is caused from the firmware upgrade this should still be covered. JB HIFI said to log with ACCC which is what I will be doing.

Re: Pro camera will not work after firmware update

Retired_Member — Sun, 11 Apr 2021 23:50:18 GMT

Push Arlo hard. At first, they wanted me to pay for a new camera which I refused to do, because the camera bricked after *their* firmware upgrade. Eventually, they agreed to a free replacement camera, which arrived even before I had a chance to return the bricked one. So in the end, it worked out, but it took a few calls and a lot of repeating myself to numerous Arlo reps.

Re: Pro camera will not work after firmware update

Bryanweinstein — Mon, 12 Apr 2021 00:51:52 GMT

Thanks jcrain, I’m not sure I have the time and patience for them anymore. I picked up a couple of Wyze cams and they work so much better. Yea, they wired, but very inexpensive.