topic Re: Motion Detection Stopped Working in Arlo Pro

Motion Detection Stopped Working

Cshaw22 — Thu, 20 Dec 2018 20:23:04 GMT

My motion just stopped working on 1 of my cameras?? I’ve tried all the troubleshooting in the help menu. Any suggestions??

Motion Detection Stopped Working

steve_t — Thu, 20 Dec 2018 20:23:18 GMT

What have you tried?

Re: Motion Detection Stopped Working

blusie76 — Sun, 23 Dec 2018 22:59:59 GMT

We are having the same problem. Haven't found the solution. Even reset the whole base station and had to re-sync all cameras. Just the one camera will not detect motion but works just fine on the live view.

Re: Motion Detection Stopped Working

jguerdat — Mon, 24 Dec 2018 03:56:09 GMT

Describe in detail how that camera is located. It's not looking through glass, is it?

Re: Motion Detection Stopped Working

blusie76 — Mon, 24 Dec 2018 04:08:24 GMT

Ours is mounted outside where it has always been, not behind glass. It has worked perfectly at sending motion alerts from this spot until it inexplicably stopped. Our other four cameras still work fine and send motion alerts.

Re: Motion Detection Stopped Working

steve_t — Mon, 24 Dec 2018 06:14:17 GMT

Have you tried removing this camera from your system and then re-syncing it and then reconstructing your custom mode(s) with a rule for this camera?

Re: Motion Detection Stopped Working

Jannybird — Wed, 26 Dec 2018 21:37:11 GMT

Arlo netgear

Re: Motion Detection Stopped Working

Jannybird — Wed, 26 Dec 2018 21:38:03 GMT

Re: Motion Detection Stopped Working

Jannybird — Wed, 26 Dec 2018 21:39:55 GMT

There are no obstructions and other 2 cameras work

Re: Motion Detection Stopped Working

PJKLOCEK — Wed, 26 Dec 2018 22:38:41 GMT

I have an Arlo Pro system with 3 cameras. Currently using 2 are indoors and 1 is outside. The outdoor camera stopped working properly. Wifi connection is fine. I removed device and reset it back up. I did sensitivity test, moved the sensitivity all over from the lowest to middle to the highest setting. I made sure all alert settings were turned on. Still, no yellow light comes on and no motion detection. I can watch and listen live with no issues, but I am getting NO motion detection or alerts. Any other trouble shooting I can do?

Thank You

Re: Motion Detection Stopped Working

jguerdat — Thu, 27 Dec 2018 03:26:04 GMT

Swap cameras around to see if the issue follows the camera or stays with the location.

Re: Motion Detection Stopped Working

Cshaw22 — Thu, 27 Dec 2018 03:29:01 GMT

Removed Battery and reset.. seems to be working fine now

Re: Motion Detection Stopped Working

Cshaw22 — Thu, 27 Dec 2018 03:30:11 GMT

Removed battery and reset.. seems to be working fine now

Re: Motion Detection Stopped Working

karenmills — Thu, 03 Jan 2019 13:54:59 GMT

All alerts have suddenly stopped. I have six outdoor cameras, all wireless. Live works fine, but I stopped receiving alerts on Dec. 23rd. They are at my vacation home, so I am not there to try a re-boot or battery removal and re-install. Any suggestions on what I can try remotely?

Thanks

Re: Motion Detection Stopped Working

jguerdat — Thu, 03 Jan 2019 14:09:14 GMT

Use a browser (not the app which may display incorrectly) to check what mode is selected - perhaps it has somehow been changed. You can reboot the base by going to Settings, My Devices, your base, Restart.