topic Motion Detection Notifications Being Sent During Unarmed Schedule in Arlo Pro

Motion Detection Notifications Being Sent During Unarmed Schedule

jalumbau — Thu, 04 Oct 2018 16:38:01 GMT

I have a VMS4430-100NAS security camera system, which has been installed and working well on the same schedule for 3 months. Today, it began sending motion detection notifications during the unarmed portion of the schedule I setup (see screenshot of schedule attached). No changes have been made to the schedule in the last couple of months, so I don't know what would have caused this change in behavior all of a sudden.

All cameras are running firmware version 1.092.0.17_25364. Hardware is H11

Motion Detection Notifications Being Sent During Unarmed Schedule

jalumbau — Thu, 04 Oct 2018 16:38:58 GMT

here's a couple more screenshots

Motion Detection Notifications Being Sent During Unarmed Schedulev

jalumbau — Thu, 04 Oct 2018 16:39:15 GMT

Motion Detection Notifications Being Sent During Unarmed Schedule

jguerdat — Thu, 04 Oct 2018 16:39:31 GMT

Use a browser to check your modes and schedule for proper operation. Sometimes the app doesn't display right for some reason.

Motion Detection Notifications Being Sent During Unarmed Schedule

jalumbau — Thu, 04 Oct 2018 16:39:46 GMT

Just did - it looks right.

Motion Detection Notifications Being Sent During Unarmed Schedule

jguerdat — Thu, 04 Oct 2018 16:40:40 GMT

And the schedule is the mode that's currently selected? Try restarting the base to see if that helps. If not, you may want to remove the current schedule settings and redo them.

Motion Detection Notifications Being Sent During Unarmed Schedule

jalumbau — Thu, 04 Oct 2018 16:40:56 GMT

Yes, that's the right schedule.

I just disabled the schedule for a few minutes and re-enabled. Let's see if that helps.

Motion Detection Notifications Being Sent During Unarmed Schedule

jalumbau — Thu, 04 Oct 2018 16:41:13 GMT

To clarify, I changed the mode to 'disarmed', then changd it back to schedule a few minutes later.