topic Recording Frame in Arlo Pro

Recording Frame

dhoctran — Mon, 11 Jun 2018 18:51:49 GMT

I'm having trouble with the Angle of the Camera...

As you can view...The car that's coming into the frame from the RIGHT...seems to be starting in the middle...it didn't capture the car as it comes in...

How is this possible and How can I adjust it?

(Click the link to view)

https://arlo.netgear.com/hmsweb/users/library/share/link/6F2A192F5733B5F6_201806

Re: Recording Frame

TomMac — Mon, 11 Jun 2018 19:26:20 GMT

@dhoctran wrote:

I'm having trouble with the Angle of the Camera...

As you can view...The car that's coming into the frame from the RIGHT...seems to be starting in the middle...it didn't capture the car as it comes in...

How is this possible and How can I adjust it?

(Click the link to view)

https://arlo.netgear.com/hmsweb/users/library/share/link/6F2A192F5733B5F6_201806

There are a couple of things....

the truck appears in the middle due to its speed and the delay of the start up of record. There is not much you can do with the normal 1-2 sec delay except

You might be able to increase the sense level

Move the camera closer or use two front cams one looking each way ( from ends of home )

Try turning the camera as some are more sensitive on the left or right side of the PIR or lower the angle

Get one Pro2 camera and run on ac as then you will have a 3 second look back

Re: Recording Frame

jguerdat — Tue, 12 Jun 2018 12:19:06 GMT

Do you really need to have the whole street view? People motion detection is only up to about 25 feet so why record cars on the street?