topic Re: only recording 16 or 21 seconds in Arlo Pro

only recording 16 or 21 seconds

JamJuice — Fri, 05 May 2017 21:48:04 GMT

Hi -

Been using two Arlo Pro wireless cameras for a couple weeks and I've noticed they only record either 16 or 21 seconds most of the time. Even when there is still motion, they turn off. They start recording again shortly after and I end up with loads of short video clips. I have the selected the option to record until there is no more motion. I've also re-sync'd the cameras. Have I got some faulty equipment?

Thanks

Re: only recording 16 or 21 seconds

TomMac — Fri, 05 May 2017 23:13:39 GMT

there is another thread the same....

https://community.netgear.com/t5/Arlo-Pro/Arlo-Pro-Stopped-recording-after-16-seconds-during-motion/m-p/1278423

It may be a bug in SW... I will pass this along to the few ears I have

For now I would put it on a fixed time of 1-2 mins

Re: only recording 16 or 21 seconds

jguerdat — Fri, 05 May 2017 23:31:03 GMT

My tests of record while motion continues resulted in 16 second videos when motion stopped for more than 5 seconds. Don't forget that the motion still has to be detectable within the range of the camera. Motion may be visible to you but not to the camera.

Re: only recording 16 or 21 seconds

JamJuice — Sat, 06 May 2017 00:07:53 GMT

Hey.

I stood waving in front of the camera.

Re: only recording 16 or 21 seconds

JamesC — Mon, 08 May 2017 23:34:50 GMT

JamJuice,

As jguerdat mentions above, if the camera stops detecting the motion, the recording will stop.

Consider running a similar test but instead of waving at the camera, walk left to right across the camera's field of view. Also consider the maximum detectable range (up to 23 feet).

Did this test result in a longer video?

JamesC

Re: only recording 16 or 21 seconds

jguerdat — Tue, 09 May 2017 00:57:43 GMT

FYI, I have videos of me leaf blowing the front walk today, durations ranging from 16 to 56 seconds. I did nothing more than walk back and forth, with some fore and aft movements.

Re: only recording 16 or 21 seconds

Addyhash — Tue, 09 May 2017 08:29:16 GMT

Mine is the same too, a dog set off my front driveway camera, still wandering about but camera stopped exactly 16 secs in...

i have record whenever movement up to 300 seconds set in settings

Re: only recording 16 or 21 seconds

JamJuice — Thu, 11 May 2017 13:00:46 GMT

Yes, mines the same. So I suppose that's as good as it gets. However, now the camera has decided to disconnect completely from the network/base. its a nice idea but more of a toy than a security camera. Going to return it.

Thanks for helping out!

Best

Re: only recording 16 or 21 seconds

Addyhash — Fri, 12 May 2017 05:23:11 GMT

"as good as it gets'

I hope not... hopefully the whole idea of this support forum is for the development and improvement of konwn issues...

Re: only recording 16 or 21 seconds

JamJuice — Fri, 12 May 2017 14:11:18 GMT

I have a replacement arriving today. Looking forward to seeing the results of the new system. Will report back.

Thanks.

Re: only recording 16 or 21 seconds

JamesC — Mon, 15 May 2017 16:13:55 GMT

Addyhash,

How far away from the camera was the dog when motion was detected? Try the test I mention above to see if you get a longer recording. Let us know the results.

JamesC

Re: only recording 16 or 21 seconds

Addyhash — Mon, 15 May 2017 23:18:53 GMT

https://arlo.netgear.com/hmsweb/users/library/share/link/1EF92D299D2144C0_201705

Heres another one... 16 secs again....

Re: only recording 16 or 21 seconds

JamJuice — Tue, 16 May 2017 02:43:47 GMT

I got my replacement. I get mostly 16 seconds with a few that run longer. So it's an improvement over the system I returned. One of the cameras only last two weeks before be out of battery.

Re: only recording 16 or 21 seconds

FlipYourFlop — Fri, 19 May 2017 18:43:34 GMT

I'm having the same issue. EVERY single one of my recordings is 16 seconds

Re: only recording 16 or 21 seconds

JamesC — Tue, 23 May 2017 16:27:11 GMT

16 second recordings simply indicates the camera did not continue to sense motion beyond the original trigger. If the camera no longer detects motion, the recording will not continue.

Try the test case below to see if longer recordings are produced:

Consider running a similar test but instead of waving at the camera, walk left to right across the camera's field of view. Also consider the maximum detectable range (up to 23 feet).

Did this test result in a longer video?

JamesC

Re: only recording 16 or 21 seconds

TreyBlack — Wed, 24 May 2017 22:27:52 GMT

Same issue. All recordings are exactly either 16 or 21 seconds.

Re: only recording 16 or 21 seconds

TreyBlack — Wed, 24 May 2017 22:29:30 GMT

Why is 23 feet the limit?

Re: only recording 16 or 21 seconds

mystery9 — Wed, 24 May 2017 23:56:07 GMT

Same issue here. I just bought a whole system and am very dissapointed. Most of my clips are 16, 18, 21 seconds and I have it set to continous. There can be on-going activity going side to side right in the "best detectable" motion field and it just stops recording and some times doesn't even start another short clip and I miss huge chunks of activity. I am curious if this is just normal behaviour or if folks that had it working well notice its not working all of the sudden after a firmware update or something?

Re: only recording 16 or 21 seconds

jguerdat — Thu, 25 May 2017 00:44:43 GMT

23 feet is just the usable detection range of the PIR detectors. Same is true of other products which use the same basic detectors.

As mentioned before, the motion has to be DETECTABLE within about 5 seconds for the recording to continue. I've tested this and found that it works as advertised. The minimum recording is typically 16 seconds but longer is possible when the subject remains moving in the detection zone, generally moving side to side, not at the camera. You can, and should, test it yourself by using these parameters as a guide.

Re: only recording 16 or 21 seconds

mystery9 — Thu, 25 May 2017 00:54:13 GMT

jguerdat wrote:
23 feet is just the usable detection range of the PIR detectors. Same is true of other products which use the same basic detectors.

As mentioned before, the motion has to be DETECTABLE within about 5 seconds for the recording to continue. I've tested this and found that it works as advertised. The minimum recording is typically 16 seconds but longer is possible when the subject remains moving in the detection zone, generally moving side to side, not at the camera. You can, and should, test it yourself by using these parameters as a guide.

They should've done the detection differently then. One would want to know if someone walks into the frame and then something happens. Imagine someone walking into someone's driveway and stealing something out of the car. The only way it will continue recording is if the criminal keeps walking side-to-side in the "detection zone" ? There won't be any evidence of what the person did to the car or took from it because he is not moving side-to-side in the detection zone? I've had security cameras in the past and for some reason they were able to detect pretty much most motion and keep recording. And why five seconds? It can't handle a second or two? Again, my older systems had no problem and at worst they missed a split second not 5+ seconds with what I am experiencing with this junk.