topic Re: Base station middle light is blinking in Arlo Pro

Base station middle light is blinking

Raavs — Mon, 11 Sep 2017 18:35:35 GMT

Hi guys,
I have been using arlo from last 3-4 months and had never faced any issues but all of sudden one day my power adopter stopped working. Since then when I switch on my base station it's middle green light is blinking for 5 seconds after a while and my app is showing arlo base as well as pro cameras offline.
Please help.

Re: Base station middle light is blinking

TomMac — Mon, 11 Sep 2017 19:57:18 GMT

the blinking INTERNET lightd is now the new normal.. a FW change has made the led blink when in communication with the servers and every now and then

Re: Base station middle light is blinking

jguerdat — Mon, 11 Sep 2017 20:16:15 GMT

What are all 3 LEDs showing?

Re: Base station middle light is blinking

Raavs — Tue, 12 Sep 2017 07:37:19 GMT

Thanks for your revert. Along with blinking internet light I am also facing problem with feed. My arlo base station as well as cameras are showing offline.

Re: Base station middle light is blinking

Raavs — Tue, 12 Sep 2017 07:38:35 GMT

Both the lights are green & stable but middle one is blinking after a while for few seconds

Re: Base station middle light is blinking

jguerdat — Tue, 12 Sep 2017 11:59:43 GMT

There should be 3 green LEDs, power, Internet and Camera. The middle one blinking is a result of Internet access, as noted above. However, if you don't have all 3 green LEDs, something is wrong. Which one is not on/green?

Re: Base station middle light is blinking

Raavs — Tue, 12 Sep 2017 14:16:16 GMT

Middle light (internet) is blinking

Re: Base station middle light is blinking

JamesC — Wed, 13 Sep 2017 20:44:00 GMT

Raavs,

Blinking green is an indication that the base is connected and communicating with Arlo servers. This is good. At this point, I would suggest logging in to your Arlo account and navigating to Settings > My Devices and removing the base station. After it has been removed, go back to your account main screen (Devices) and click "Add Device". Select base station and follow the on screen instructions. If you're having trouble discovering the device, you may need to manually factory reset the base by pressing and holding the reset button until all LEDs flash amber. Also be sure the device you are using to add the base station to your account is connected to the same network as the base station.

JamesC

Re: Base station middle light is blinking

xtremerider — Thu, 14 Sep 2017 14:11:18 GMT

James C Your suggestion worked.. Thanks Xtremerider

Re: Base station middle light is blinking

Raavs — Thu, 14 Sep 2017 16:27:27 GMT

It worked! Thanks

Re: Base station middle light is blinking

Ksilver36 — Fri, 22 Sep 2017 00:33:19 GMT

Help I'm so sick of this I've bought two
Cameras 500 plus new battery which one says change I've only had it less than 6 months now I can't get the base to work one minute the middle light flashes next the far right is dark I can't now get it sync and it won't re start

Re: Base station middle light is blinking

jguerdat — Fri, 22 Sep 2017 11:47:41 GMT

The Internet LED flashes with Internet access. We need details on what you see and what you've done.

Re: Base station middle light is blinking

JeanFrancois972 — Thu, 12 Oct 2017 19:28:40 GMT

Solved my issue too :-)