topic Re: Arlo pro camera senativity issues in Arlo Pro

Arlo pro camera senativity issues

gregorywalstrom — Thu, 07 Sep 2017 15:26:16 GMT

Unit is starting to record when vehicles pass on the street. Street is about 90 and 100 ft respectively from cameras

Re: Arlo pro camera senativity issues

Streak2 — Thu, 07 Sep 2017 15:32:17 GMT

Have you tried reducing sensitivity under the Mode tab?

Re: Arlo pro camera senativity issues

jguerdat — Thu, 07 Sep 2017 15:36:42 GMT

Or turn off the audio trigger in your modes.

Re: Arlo pro camera senativity issues

gregorywalstrom — Thu, 07 Sep 2017 15:55:00 GMT

Audio is off. Just turned sensitivity down to 70. We'll see.

Re: Arlo pro camera senativity issues

gregorywalstrom — Thu, 07 Sep 2017 15:57:01 GMT

I just turned the sensitivity down to 70 in the motion detection test.

Re: Arlo pro camera senativity issues

gregorywalstrom — Thu, 07 Sep 2017 16:00:10 GMT

Well, the 70% didn't work. 2 cars going down the street triggered them.

Re: Arlo pro camera senativity issues

gregorywalstrom — Thu, 07 Sep 2017 16:31:11 GMT

Here is a detection for 6 seconds. Nothing out there. What sensitivity should I use. I did 70% on the motion sensitivity test. Couldn't upload it, wrong type of file. What will happen if I continue to turn down the sensitivity?

Re: Arlo pro camera senativity issues

Streak2 — Thu, 07 Sep 2017 17:55:33 GMT

The motion detection will become less sensitive.

Keep going down in steps of 5% until to does not trigger to your satisfaction then bump it up 1% at a time to find your sweet spot.

Re: Arlo pro camera senativity issues

gregorywalstrom — Thu, 07 Sep 2017 18:48:16 GMT

I'll try that, thanks