topic motion detection changing area of sensitivity in Arlo Pro

motion detection changing area of sensitivity

ta_mnymkr — Fri, 14 Apr 2017 10:36:21 GMT

Motion detection only seems to work near the center of the area that Arlo is focused on. Is there a way to sense near the edges verses the center?

Re: motion detection changing area of sensitivity

jguerdat — Mon, 17 Apr 2017 13:30:26 GMT

It may be as "simple" as the camera positioning and how motion moves in the field of view. What's the sensitivity setting? Post a screenshot for suggestions.

Re: motion detection changing area of sensitivity

PittCaleb — Mon, 17 Apr 2017 14:02:48 GMT

I just upped my sensitivty to 95 on 2 of my 4 camera's to see if this helps my situation (not OP).

In an OpenSource solution I used to use (went Arlo for true wireless functionality) I could define a polygon for motion detection.

I have no issue with motion being detected in center frame, my problem is i see so little b/c there is no pre-roll buffering. I catch the mailman 'closing' my mailbox. Not walking into the center of the frame or even opening the mailbox, but closing it and walking away. This is at 80 sensitivity and mailbox being near-center of frame.

I want devices to keep a 3/5 second buffer and when motion detected, it writes that buffer. What happened to get to the activation point? Often, that is the key to everything. Accident or thief.

PittCaleb

Re: motion detection changing area of sensitivity

jguerdat — Mon, 17 Apr 2017 16:46:35 GMT

The Q cameras have that pre-buffer since they're powered. The wireless cameras would have to be awake the whole time to do that and would deplete the batteries quickly.

Again, screenshots would be useful.