topic Re: Security Light Generic alerts in Arlo Security Light

Security Light generic alerts. Receiving alerts that motion is detected from Bridge.

IraJ — Fri, 19 Jun 2020 18:48:35 GMT

I have named my security lights, but when I get alerts they are just generic. I have reset and removed the devices and still getting generic alerts.

Re: Security Light Generic alerts

Djam311 — Fri, 19 Jun 2020 13:17:09 GMT

I have the exact same problem. Up until yesterday my iOS motion alerts stated which light was triggered, but now the alert just says motion detected on security light bridge. I have opened a ticket with support. Sorry to hear this but I’m glad I am not the only one.

Arlo lights notifications not indicating which light it comes from.

alexcdiz — Fri, 19 Jun 2020 17:59:36 GMT

I have 3 lights connected to a lights bridge and to my Arlo Pro 2 camera system.

I used to receive precise notifications from the device (light) that detected motion. Now all the arlo lights notifications are identified with the name of my lights bridge and not from the device that detected motion. Hence I am not able to identify where the motion was detected. All my devices have the latest firmware. And this happened after updating apple OS to 13.5.1

Please help me.

Re: Security Light Generic alerts

JessicaP — Fri, 19 Jun 2020 18:50:23 GMT

Hi everyone,

Thanks for bringing this up. I've informed the development team about this and they should be looking into this. I'll provide any new information when I hear any new update from the team.

Re: Arlo lights notifications not indicating which light it comes from.

IraJ — Fri, 19 Jun 2020 19:32:16 GMT

Same here. I couldn't find anything on the Arlo community so i created this post. Some update had to cause this issue.

Arlo Security lights labeling

denmart1 — Fri, 19 Jun 2020 21:12:55 GMT

I had labeled my arlo security lights for each location around house so notifications woukd let me know which light was triggered. For some reason the distinct labeling on notifications ceased and they all say the name of my bridge which makes impossible to know which light was triggered. What setting controls that and why would it have changed? How do I change it back?

Security Light Notifications no Longer Says Light Name

NatBran — Sat, 20 Jun 2020 16:27:57 GMT

Dear Arlo,

My security lights used to show the name of the specific light when a notification was sent. This allowed me to know where around my property a light was set off and motion happened. Since the last update, when a light is triggered, the notification on my phone says the name of the security light HUB, and not the individual security light. This is not useful, as I have 5 lights around my property and I no longer know where the movement happens. Please fix!

Re: Security Light Notifications no Longer Says Light Name

Djam311 — Sat, 20 Jun 2020 20:44:24 GMT

There is already a thread about this.

motion detected on light bridge

leeaz — Sun, 21 Jun 2020 18:03:39 GMT

something changed recently in the software or hardware of the light bridge and their security lights. i have 3 lights, each with a unique name. until recently, maybe a week ago, when motion triggered a light, the iphone alert provided the name of the light that was triggered.. now i just get a notification of "Motion detected on Light Bridge at xx time". i am no longer getting the name of the light that was triggered. and yes, the lights still have valid names according to the app on my phone.

i do need the light name to be included in the notification.

Re: motion detected on light bridge

Mdterps — Mon, 22 Jun 2020 00:40:16 GMT

I am also now having this exact same problem. It no longer notifies me which light has detected motion and only uses the bridge name.

Re: motion detected on light bridge

kegobeer — Mon, 22 Jun 2020 01:16:47 GMT

I'm glad I'm not the only one with this problem. It's been going on for at least a few days for me. Hopefully this is a quick fix.

Re: Security Light Generic alerts

mamarcac — Mon, 22 Jun 2020 16:29:47 GMT

@JessicaP wrote:

Hi everyone,

Thanks for bringing this up. I've informed the development team about this and they should be looking into this. I'll provide any new information when I hear any new update from the team.

Add me to the list with this same issue. @JessicaP any chance you could ask the dev team to actually test releases? These bugs are so obvious even the most basic QC would catch it.

Light Bridge Notifications

Qwerty1111 — Mon, 22 Jun 2020 16:50:19 GMT

I have the lights working previously with no problems. Recently notifications for each light show up as Arlo Light Bridge detected motion or sound instead of the actual name of the light. I have rebooted the bridge and the main arlo hub.

Re: Security Light Generic alerts

Trahuy — Wed, 24 Jun 2020 00:48:20 GMT

Same problem here. It's kinda useless for It's purpose which I bought for. Still not fixed yet.

Re: Security Light Generic alerts

JessicaP — Wed, 24 Jun 2020 14:26:33 GMT

Updating everyone that our development team was able to identify the issue and the fix should be coming soon. We'll make sure to update the community when any other new information.

Re: Security Light Generic alerts

d_d — Wed, 24 Jun 2020 14:55:17 GMT

Pleased to hear a fix is coming for identifying specific devices attached to the light bridge. At about the same time the notification became generic I began getting notices in my email that did identify the specific device. Email notices for the light bridge we’re new. Alerts for the cameras come as notifications and email which is appropriate.

Is is there an option for types of notification for the light bridge?

Re: Security Light generic alerts. Receiving alerts that motion is detected from Bridge.

Shipit — Mon, 29 Jun 2020 01:33:46 GMT

Same problem. Hopefully the fix is released soon.

Re: Security Light Generic alerts

scottnsamantha — Mon, 29 Jun 2020 23:13:08 GMT

Same problem here. Good to hear that the development team is working on a fix. How do I get updates in regards to the fix?

Arlo Security Lights stop sending notifications from particular triggered light

alex1esf — Tue, 30 Jun 2020 05:03:17 GMT

hello, I have Arlo Security Lights installed around my house. I divided them into groups Front and Back. 4 lights connected to the Front Bridge and 4 to the Back Bridge. before recent update I got notifications from each certain light with the name tag , I.e. “Motion detected on Arlo Front Light #1 or Motion detected on Arlo Back Light #3” and etc. but now I’m getting “Motion detected on Arlo Bridge Back” or “Motion detected on Arlo Bridge Front” and that’s it. this is very inconvenient. please help me to fix it. thanks.

Re: Arlo Security Lights stop sending notifications from particular triggered light

michaelkenward — Tue, 30 Jun 2020 09:27:12 GMT

There have already been several similar reports. This one for example, from two weeks ago:

Security Light generic alerts. Receiving alerts th... - Arlo Community

It may be associated with another similar issue:

Base Station Motion Detected notifications - Arlo Community