topic Arlo Light receiving notifications but not triggering camera. Tried rebooting/re-logging. in Arlo Security Light

Arlo Light receiving notifications but not triggering camera. Tried rebooting/re-logging.

Nopainnogain — Tue, 03 Sep 2019 22:21:43 GMT

I have an arlo light down the end of my driveway,mainly to trigger a camera at my fro door earlier and get a longer recording.it has worked for several weeks flawlesly but for the past few days the light triggers,i get a notification and if its dark the light comes in,but it isnt triggering the camera and recording.
As a test if i walk up the drive,trigger the light(notification but no record) then walk up the drive to within range of the camera it will then trigger and record as expected.
Its definitely not a mode or rule problem as it used to work and i have tried all the log out/in reboothub/bridge/cameras/light etc dozens of times.
Any ideas please

Re: Arlo Light receiving notifications but not triggering camera. Tried rebooting/re-logging.

jguerdat — Tue, 03 Sep 2019 22:21:53 GMT

Have you tried a new mode as a test?

Re: Arlo Light receiving notifications but not triggering camera. Tried rebooting/re-logging.

Lorre — Tue, 03 Sep 2019 22:22:01 GMT

hey i'm new here, i'm from belgium and sorry for the possible writing errors.
I also have this problem arlo licht gives a message, this is in turn triggered to a camera, but does not record a video.
when I look at my devices during a message, I see the orange movement symbol light up, the camera LED lights up, siren goes off but no image recording, which may be the problem. grt, lorenzo

Re: Arlo Light receiving notifications but not triggering camera. Tried rebooting/re-logging.

JessicaP — Tue, 03 Sep 2019 22:22:11 GMT

Hi Lorre,

Have you tried what jguerdat mentioned above to try testing?

Re: Arlo Light receiving notifications but not triggering camera. Tried rebooting/re-logging.

howarmat — Wed, 04 Sep 2019 14:19:32 GMT

Same here. I am using Ultra cameras and base which I think might be the issue. This worked fine with my Pro cameras and base

Re: Arlo Light receiving notifications but not triggering camera. Tried rebooting/re-logging.

Nopainnogain — Wed, 04 Sep 2019 16:58:33 GMT

Tried everything suggested by tech support,they now admit there is a known software bug they are working on so for now they are just very expensive motion triggered lights

Re: Arlo Light receiving notifications but not triggering camera. Tried rebooting/re-logging.

JessicaP — Fri, 06 Sep 2019 14:41:59 GMT

Our development team is investigating reports where there is no recording from the Arlo camera when using cross-triggering with Arlo Security Lights. When we hear more information or update, we'll be sure to update the community. We appreciate your patience and understanding.

Re: Arlo Light receiving notifications but not triggering camera. Tried rebooting/re-logging.

Nopainnogain — Wed, 18 Sep 2019 18:45:37 GMT

I presume theres
Still no update as it still doesnt work,i am actually un-installing these lights sometime in the next week As they are if no use as just a security light,i may as well just fit mains powered very bright cheap ones.

Re: Arlo Light receiving notifications but not triggering camera. Tried rebooting/re-logging.

JessicaP — Tue, 15 Oct 2019 23:02:31 GMT

If you are still experiencing this issue, could you verify if this is happening on the Arlo Ultra camera only or if you're experiencing this issue on other cameras? If you're experiencing this issue on other cameras, could you let me know which other cameras you're having problems with?

Cross triggering with cameras is not working

Gregav8 — Mon, 21 Oct 2019 21:46:59 GMT

I have been having the same problem for quite a while. I have camera A set to trigger based on motion and to create a recording on camera A and B however the system is still only recording on camera A. I have tried a custom mode, changing recording length, multiple reboots. No help.

The home screen will show a snapshot of when the camera SHOULD have recorded, but it doesn’t record.

Any ideas?

Cross triggering Security lights is not working properly

SD_Rich — Mon, 28 Oct 2019 18:15:10 GMT

First my system:

- Arlo Pro 2 with 4 cameras

- 2 Arlo Lights w/ light bridge

- everything using the latest updates

I mounted the 2 lights at the front of my house approximately 20 feet apart. Motion detected by either light will activate light #2 only. The weird part is that I made a custom rule for light #1 to only activate light #1, but it still activates only light #2. If the battery from light #2 runs out, then light #1 works correctly. I have relocated the light bridge to 3 different locations, deleted and re-added both lights, and deleted and recreated the rules, restarted everything (including my home network) countless times - nothing will fix the problem. Sometimes after fighting with it for hours, I can get it working correctly, but then the problem returns the following day.

Please help!!

Re: Multiple camera recordings

ShayneS — Mon, 21 Oct 2019 21:46:24 GMT

Hi @Gregav8

Are you still experiencing this recording issue with your cameras?

Re: 2 lights at front of house - either will trigger motion, but only light #2 will turn on

ShayneS — Mon, 21 Oct 2019 22:44:05 GMT

Hi @SD_Rich

Have you tried to use the web portal to create these rules & test again?

Re: Multiple camera recordings

Gregav8 — Thu, 24 Oct 2019 04:40:08 GMT

yep. The cameras will record when they are tripped, but still will not activate recording on the second camera

Re: Multiple camera recordings

ShayneS — Thu, 24 Oct 2019 16:29:01 GMT

Hi @Gregav8

Is it possible to get your cameras/order & setup? I would like to test this issue as well. Thank you

Re: Multiple camera recordings

Gregav8 — Thu, 24 Oct 2019 18:51:18 GMT

Sure thing @ShayneS

Let me know what else is needed to get this figured out hopefully!

How do I attach

Re: Multiple camera recordings

ShayneS — Thu, 24 Oct 2019 19:11:41 GMT

Thank you for that. Is it possible to provide the recording/cross-triggering Cameras you are using, so I can test with the specific cameras you are using. Thanks again!

Re: Multiple camera recordings

Gregav8 — Thu, 24 Oct 2019 19:25:39 GMT

Sure @ShayneS

The cross-triggering are front yard and driveway. They are both set to record when motion is detected on either camera. I had a pic of the settings for the driveway camera. I have tried removing the cross triggering from both and re adding it and that has not worked either. Is there a way to get additional info for you?

Re: Multiple camera recordings

ShayneS — Thu, 24 Oct 2019 21:17:43 GMT

Sorry for the confusion, is this a pro camera triggering a pro camera? Pro 2, Ultra, Pro 3 etc?

Re: Multiple camera recordings

Gregav8 — Thu, 24 Oct 2019 21:39:25 GMT

Ohhhh I got ya....

All of the devices are Pro 2

The base is the VMB4000r3

firmware 1.14.1.1_2913_78b189a