topic Re: Arlo Go in Arlo Go

Arlo Go randomly ignored scheduled settings

RFlood — Wed, 01 Dec 2021 00:22:48 GMT

Firmware 1.096.3.2_1.8.65.0_22

Version 3.5.11_2

Date Nov 16, 2021

Since that time, the Arlo Go has randomly ignored the Scheduled settings. It will keep sending notifications & recording after the cut off time. Initially, I re-installed the camera and recreated the schedule. That worked for a few days. Then twice this week, it continued on past the scheduled cut off. When I open the app (on iPhone) it says something about firmware has been updated. Then when I try to restart the device, it says it's off-line. What to do? Try manually updating firmware? Anyone else having problems since Nov 16th ?

Re: Arlo Go

JessicaP — Wed, 01 Dec 2021 00:22:36 GMT

Hi RFlood,

Are you experiencing the issue where your camera is still offline even after the firmware was updated on your camera?

Re: Arlo Go

RFlood — Wed, 01 Dec 2021 14:11:35 GMT

I'm learning that when I press "reset" it automatically says it's offline. After that, it comes back online and will follow the schedule MOST of the time, but every 3 -4 days it will keep recording & sending notifications after the cut-off time. This seems to correlate to the firmware update in November. It has not sent any more notes about "firmware has been updated" (or something to that effect).

Re: Arlo Go

JessicaP — Wed, 01 Dec 2021 21:38:17 GMT

Try deleting your schedule and re-create it again through the web client on your computer to see if that may help.

Re: Arlo Go

RFlood — Thu, 02 Dec 2021 17:57:09 GMT

I did that ... removed the device and then reinstalled it with a new name and recreated the schedule a couple weeks ago. This am, every time I open the iPhone app it flashes "firmware has been updated" twice. I just removed the app from my phone and reinstalled it (oddly it was still configured with the same camera and schedule) and still flashing firmware message. It does not do that from the web app on my computer, but the library is full of recordings from after the schedule cut off time on both devices.

I was going to try updating (or re-updating) the firmware manually and found the instructions online, but there is no button to update firmware as per the instructions. On the app, it says no updates available.

Re: Arlo Go

JessicaP — Mon, 06 Dec 2021 18:21:23 GMT

Try restarting your Arlo Go (not removing the device) by removing the battery and re-inserting it back in to see if that might help.

For the "firmware has been updated," the development team is aware about this issue and is looking into the issue. You can get updates when this issue will be fixed here: "Firmware has been updated" showing on my Arlo iOS app. Not seeing it on web client.

Betreff: Arlo Go randomly ignored scheduled settings

Orla-Resu — Wed, 08 Dec 2021 06:01:38 GMT

I have the dame fw installed on my 2018 arlo GO (H4) and experienced the same problem in the past few weeks. STOP recording schedule ist ignored. Unfortunately I cannot find any info about fw changelog….

Re: Betreff: Arlo Go randomly ignored scheduled settings

JessicaP — Wed, 08 Dec 2021 15:28:22 GMT

Hi Orla-Resu,

Have you tried removing your schedule and creating it again to see if that helps? Have you also tried re-creating it back through the web client on your computer?

Re: Arlo Go

RFlood — Tue, 14 Dec 2021 15:15:13 GMT

Removed the battery and it worked properly for 3 days. Now the camera is active, but not following the schedule at all... no recordings or notifications.

Re: Arlo Go

JessicaP — Tue, 14 Dec 2021 20:16:03 GMT

We'd suggest you to navigate to Settings > Support in the Arlo App for service options available to you including live chat to assist you further.

Re: Arlo Go

RFlood — Tue, 14 Dec 2021 20:30:52 GMT

Hmmm... the only options are community support unless I buy a subscription. Not thinking this is fair when this all stems from a firmware update that I didn't ask for. Therefore, question, after 2 yrs, is this camera toast, or is there a way to roll back the firmware? Or is technical department still working on this?

Re: Arlo Go

StephenB — Tue, 14 Dec 2021 21:33:21 GMT

@RFlood wrote:

is there a way to roll back the firmware?

The answer to that is no.

@RFlood wrote:

Hmmm... the only options are community support unless I buy a subscription.

Setting the fairness question aside: You can purchase a single-camera subscription, and then cancel after your issue is resolved. They will prorate the amount in the month you cancel (refunding part of the month).

Re: Arlo Go

ShayneS — Mon, 07 Mar 2022 18:41:42 GMT

@RFlood

Are you still experiencing this issue?

Re: Arlo Go

RFlood — Mon, 07 Mar 2022 20:51:47 GMT

I just placed it back in Schedule Mode as it has been disarmed. I'll know tomorrow how it responded.

Re: Arlo Go

ShayneS — Mon, 07 Mar 2022 22:12:30 GMT

Okay, thanks for the update.

Re: Arlo Go

RFlood — Tue, 08 Mar 2022 13:56:55 GMT

Yesterday, I set the mode to schedule, which is basically 8pm to 6am. It did nothing. This am I adjusted the schedule to extend to be currently active and saved the setting (for today only). Within a couple of minutes it detected motion and sent the notification to my phone and the event is recorded in the library as expected.

I'll leave it as is and see if it will follow the existing schedule that is in the settings. The results won't be known until tomorrow. IF it does not operate as expected, I'll make adjustments to all the daily schedules and see if that makes a difference. It will take a couple of days to complete the test.

Re: Arlo Go

ShayneS — Tue, 08 Mar 2022 18:37:37 GMT

Perfect, thanks for another update : )

Re: Arlo Go

RFlood — Thu, 24 Mar 2022 13:25:23 GMT

It still arms as per schedule, but doesn't stop at the correct time, unless I disarm it.

Re: Arlo Go

jguerdat — Fri, 25 Mar 2022 13:10:09 GMT

I'd suggest deleting the whole schedule and rebuild it.

Re: Arlo Go

RFlood — Fri, 25 Mar 2022 13:38:29 GMT

I've rebuilt it at least once, but will try again. As I said yesterday, it was unable to connect. This am it had "firmware updated" and I had to arm it to get a live shot. I'll rebuild it today and see what happens.