topic Re: Error indicator under settings in Features

Error indicator under settings

Klepoy — Tue, 27 Sep 2016 16:29:49 GMT

There is a red triangle warning/error indicator over the settings icon. Any idea what this means. If I click on settings, the indicator is above the new camera I added yesterday (which seems to be working btw).

Thanks.

Re: Error indicator under settings

TomMac — Thu, 07 Apr 2016 15:44:03 GMT

It may be the sign that an sw update is available....

check under Settings and that camera look towards bottom of page

Re: Error indicator under settings

Klepoy — Thu, 07 Apr 2016 16:54:28 GMT

Ok. That was it. What threw me off is the fact that all cameras are running the same firmware (1.2.2688) but only one camera had the warning icon.

Also, just a suggestion, it would help if the warning icon shows up under 'device info' when you click on the camera under devices. This way there is an indication where to look.

Thanks.

Re: Error indicator under settings

TomMac — Thu, 07 Apr 2016 17:16:31 GMT

reboot the base before you go to bed... prob the ( or all ) the cameras will update during the night ( usu about 3-4 am )

Re: Error indicator under settings

Klepoy — Fri, 08 Apr 2016 01:11:03 GMT

So the update button under device info-> firmware does not work? Rebooting the base triggers the update? Thanks.

Re: Error indicator under settings

TomMac — Fri, 08 Apr 2016 13:37:06 GMT

Klepoy wrote:
So the update button under device info-> firmware does not work? Rebooting the base triggers the update? Thanks.

Well, I've used the button to ATTEMPT to force an update and I have never seen it work right away ( tho it may set a flag for later in the night when the server reaches out for normal house-keeping )

The power reboot of the base just insures the cache/info in the base is clear to prevent any possible problems later ( use to be part of a forced update but since the changes in Dec- jan , it works a bit different and we on this end have less control )