topic Re: Motion Detection vs camera Re-Arm time in Features

Motion Detection vs camera Re-Arm time

Spyder76 — Fri, 09 Dec 2016 21:42:31 GMT

Is there a Re-Arm cycle that a Alro Pro camera requires after it records a motion event? It seems like if one event is recorded at 12:01:01am an the recording is set at 10 seconds. I never get a re-occuring motion event within the same minute. Thus if there is a reoccuring motion event within the same minute I would miss the recording.

Re: Motion Detection vs camera Re-Arm time

jguerdat — Thu, 08 Dec 2016 20:41:24 GMT

Yes, although the exact duration of the reset likely depends on a number of things. 15-30 seconds has been reported. I recommend increasing the recording time to overcome this issue.

Re: Motion Detection vs camera Re-Arm time

Erock901 — Fri, 09 Dec 2016 22:32:18 GMT

Increasing the recording time doesn't change the fact that the delayed reset is a problem. You could set the recording time to 90 seconds but if the incident carries on for 120 seconds, you'll miss the last 30 seconds. I wish I would've known about this issue before I purchased my Arlo Pro's. i hope this delay time can be shortened via some kind of firmware upgrade.

Re: Motion Detection vs camera Re-Arm time

kmiller8821 — Thu, 22 Dec 2016 15:09:54 GMT

I'm not sure if they notified anyone, but I noticed that in my cameras I now have the ability to either record for a fixed time or to record until motion stops (up until 300 seconds). That may help you also.

Re: Motion Detection vs camera Re-Arm time

jguerdat — Fri, 23 Dec 2016 13:31:31 GMT

Yup, but it doesn't work. It records the previously selected time minus 1 second. It's been stated that this will be removed until fixed.

Edit: Just checked - it IS gone now. Check your settings in your modes/rules. When I reverted back to the static time, it also reverted to 10 seconds. I don't know how it will respond with the removal before switching back.

Re: Motion Detection vs camera Re-Arm time

kmiller8821 — Fri, 23 Dec 2016 13:55:14 GMT

Yeah, I tried to delete my post once i realized it wasn't working from the firmware forum but this forum wouldn't allow me to delete it. I'm not sure why. Thanks for the clarification, I've already set my times back up on mine when I realized it wasn't working as expected.

Re: Motion Detection vs camera Re-Arm time

nancystevens — Fri, 27 Jan 2017 18:55:08 GMT

I would like to extend the recording time of the video. How do I do that?

Re: Motion Detection vs camera Re-Arm time

jguerdat — Sat, 28 Jan 2017 14:55:45 GMT

Use the Mode tab, click on your base and edit your modes. All settings are in there.

Better yet, create your own custom modes with exactly what you want. When creating a new mode, one camera gets a rule set up. Save and reedit it to add camera rules. ANy camera without a rule is disarmed.