topic Re: Arlo Doorbell Motion Detection Sensitivity in Arlo Audio Doorbell

Arlo Doorbell Sensitivity

tims0891 — Wed, 07 Nov 2018 15:22:02 GMT

The issue I am experiencing is the sensitivity of the doorbell motion sensor. I am noticing false alerts that occur frequently. My front door (Doorbell) is located about 30 feet from the main front street and I can only assume any type of car that passes, or person walking by on the sidewalk triggers the doorbell which then triggers the front camera to start recording. Would be great if Arlo could push an update that allows for the adjustment of the doorbell sensitivity, which would mimic the camera adjustment options. Anyone else having a similar issue?

Re: Arlo Doorbell Sensitivity

Terminal3 — Wed, 07 Nov 2018 17:45:09 GMT

Luckily for me my front door is a good bit back from the road and doesn't get triggered by passing traffic. A car will occasionally trigger my camera which is just above the door bell. When my camera gets triggered I get 15 or 20 second recordings, but when the doorbell motion gets triggered I get 5 min recording. I have everything set to only record while motion is preset. So on the times the doorbell triggers I usually get several minutes of looking at my front yard. . I could imagine that getting a bunch of 5 minute recording could drain a battery pretty quickly.

So an adjustment for the doorbell sensitivity seems in order.

Arlo Doorbell sensitivity slider

Delid — Fri, 30 Nov 2018 16:21:07 GMT

Is there a slider bar or way to adjust the motion sensing on the doorbell? My front door faces the street and any time a large vehicle passes in front of my house, i.e. Truck, Bus or Van, i get a notification. I'm guessing the sensor is defaulted to 100%?

Re: Arlo Doorbell

jguerdat — Fri, 30 Nov 2018 01:58:45 GMT

Not yet. I also hope it gets added.

Re: Arlo Doorbell Sensitivity

Jberan00 — Sat, 22 Dec 2018 05:07:44 GMT

I have the same issue with the doorbell. When it sects motion it records for 5 minutes, not just the time that motion is present. I have this set to only record when motion is present but it records for 5 minutes.

Re: Arlo Doorbell Sensitivity

schumaku — Sat, 22 Dec 2018 09:00:56 GMT

@Terminal3 wrote:

..., but when the doorbell motion gets triggered I get 5 min recording. ...

@Jberan00 wrote:
I have the same issue with the doorbell. When it sects motion it records for 5 minutes, not just the time that motion is present. I have this set to only record when motion is present but it records for 5 minutes.

In my understanding, the recording length is fixed with the Audio Doorbell triggering it from motion. This is certinly different from the Arlo Q/Arlo Q Plus (which can stop recording if motion stops), not sure how the base station linked wireless cams handle it however in general (fixed length or once motion stops) without a linked doorbell. If only the HD Camera here does detect the motion, and this camera is paired to the Audoi Doorbell, we see the same fixed time length recordings as configured for the Audio Doorbell motion detection.

Check the Audio Doorbell recording settings in Devices -> Audio Doorbell -> Motion & Audio Settings -> Recording Settings

The max. recording time we configure is 120 seconds/2 minutes - so not sure from what does keep up the recording for five minutes, probably the camera and there might be an implicit max length of five minutes - wild guessing.

Re: Arlo Doorbell Sensitivity

jguerdat — Sat, 22 Dec 2018 14:13:57 GMT

Motion detection from the doorbell can be set for either record until motion stops or for a fixed time. I use the fixed time since motion may stop.

Re: Arlo Doorbell Sensitivity

Jberan00 — Sat, 22 Dec 2018 14:37:27 GMT

I tried the until motion stops but it does not work. Still records to 5 minutes.

Re: Arlo Doorbell Sensitivity

jguerdat — Sat, 22 Dec 2018 19:07:48 GMT

Try a mode for just the camera - does that work properly? If so, you could use that mode, letting the camera detect and record or you could remove the doorbell and resync it to see if that works better.

Re: Arlo Doorbell Sensitivity

schumaku — Sat, 22 Dec 2018 20:15:12 GMT

@jguerdat wrote:

Motion detection from the doorbell can be set for either record until motion stops or for a fixed time. I use the fixed time since motion may stop.

Show us where - there is no such option "until motion stops" - only a slider for 10...120 seconds, Recording Settings does only show the "Recording Time" as in the screenshot above.
===

RECORDING TIME

Set the length of the recordings when motion or audio is detected.

Record for a fixed length of time
===
Aside, the units are missing in the Web UI - the App does show seconds.

Re: Arlo Doorbell Sensitivity

jguerdat — Sun, 23 Dec 2018 01:18:37 GMT

Android app.

Re: Arlo Doorbell Sensitivity

schumaku — Mon, 24 Dec 2018 16:27:54 GMT

That's the time recording, not a sensitivity setting. This is available for the Arlo Q only, not for the Base Station cameras//devices. Where is SaaS thing?

Re: Arlo Doorbell Sensitivity

schumaku — Mon, 24 Dec 2018 18:17:15 GMT

Android App (v2.6.5._23400 on Android 9) - only time:

...or Web Client

Re: Arlo Doorbell Sensitivity

schumaku — Tue, 25 Dec 2018 12:02:27 GMT

@jguerdat Is this "Record until activity stop (max 300 seconds)" feature availability specific to the camera model (e.g. only on Arlo Pro and Arlo Pro 2, not on HD Camera), the Base station (e.g. not on the basic VMB3000)?

Re: Arlo Doorbell Sensitivity

jguerdat — Wed, 26 Dec 2018 01:25:41 GMT

Mine happens to be a Pro camera on a Pro base but I don't believe that makes a difference. I don't have an original camera in operation so can't say for sure.

Re: Arlo Doorbell Sensitivity

LoudHogRider — Mon, 04 Feb 2019 16:17:19 GMT

I'm having the same issue with frequent (15-25 per day) false alerts from the motion sensor in my doorbell. I've had to disconnect it from the paired camera recording because it was draining the battery ... and annoying the crap out of me. It does not face the street, but rather faces another wall approximately 8' away in a protected vestibule area, so I know it's not picking up random peripheral events.

If there's no software update to enable motion sensitivity for the doorbell in the immediate future, I'm pulling it and replacing it with a competitor's video doorbell (Nest Hello).

Clearly not what I hoped for out of the purchase experience, but enough is enough.

Re: Arlo Doorbell Sensitivity

jguerdat — Mon, 04 Feb 2019 17:47:59 GMT

For some reason, using the doorbell to detect and start a recording frequently gives me recording an hour, exactly an hour apart. I've deleted and resynced the doorbell and camera with no success. So I have disabled the doorbell detection and use the camera instead which works fine.

Re: Arlo Doorbell Sensitivity

LoudHogRider — Mon, 04 Feb 2019 18:12:18 GMT

I've disconnected the doorbell from the camera which covers the porch. I'll continue to monitor for 'false alarms' on the doorbell only for the next few days, but I have previously experienced those as well. Just a wonky setup.

As edification, I have one of the original base units (3010) and H7 cameras (4). Perhaps it's a compatibility issue with the older base station/cameras and newer doorbell units.

Re: Arlo Doorbell Sensitivity

Terminal3 — Tue, 05 Feb 2019 15:19:04 GMT

I have just come to this conclusion as well. I have disabled motion detection on the doorbell. I will just depend on the camera and see how that works.

Arlo Doorbell Motion Detection Sensitivity

L3EDX_UK — Mon, 25 Feb 2019 23:38:04 GMT

My doorbell points away from the house and towards a main road. It keeps going off and alerting when large lorry/trucks go by or people walk down the street.

I have to turn off the motion detection, which results in my camera only taking a photo when the doorbell is pushed rather than a video recording.

Please introduce a sensitivity adjustment like we have with the cameras.