topic Re: TangsFire 1000mAh 3.7V batteries in Buying Options & Tips

TangsFire 1000mAh 3.7V batteries

jguerdat — Mon, 26 Sep 2016 04:37:05 GMT

I recently received a different battery than the ones I was trying before. I previously had used gray UltraFire 2300 may with reasonable results (~350 minutes of recording or 2 months normal usage). I also have some purple GTLs that I haven't tried yet. However, I'm interrupting the test of the GTLs to try new ones - TangsFire 1000 mAh.

Right off the bat, I charged them up using the included charger as well as one of my (slightly) older ones. Interestingly, the included charger charged to 4.15v while the other charger went to 4.20v. I charged the GTLs again withe two older chargers and they all came out at 4.10v (all readings were after a few hours rest). Seemingly the higher voltage could last longer although actual discharge rates have to be determined.

So, I now have the TangsFire installed in my heavy-usage camera and will continue to report on them. They'll prolly only last for 3 to 4 weeks based on my usage. If anyone else has these batteries, please post your impressions and results here.

Re: TangsFire 1000mAh 3.7V batteries

TomMac — Sun, 10 May 2015 12:48:35 GMT

More info is good info 🙂

Re: TangsFire 1000mAh 3.7V batteries

AnthonyArmato — Sun, 10 May 2015 16:34:05 GMT

I almost bought those than I saw the ones I ended up purchasing, the On The Way 2000mAH's. I had always read negative remarks on anything "Fire".

Re: TangsFire 1000mAh 3.7V batteries

TomMac — Sun, 10 May 2015 16:48:33 GMT

jguerdat wrote:snip
So, I now have the TangsFire installed in my heavy-usage camera and will continue to report on them. They'll prolly only last for 3 to 4 weeks based on my usage. If anyone else has these batteries, please post your impressions and results here.

Ok.. went and looked at them... they all look like the ultrafire but branded differently ( should i say shrink wrap cover )... just like the GTLs and diff colors.

I hope they test out well, But I still stand by my original statement...

Haven't seen name brand rechargeables that are really more than half of the regular cells.

All the "name" brands are in the 500-750mahr.

Re: TangsFire 1000mAh 3.7V batteries

jguerdat — Sun, 10 May 2015 20:52:09 GMT

I note that my GTL and UltraFire batteries seem to be the same since the shrink wrap misspells "cost" as "cist" on each. I really don't expect them to be different. The TangsFire have different words although the same general statements as the others. I'm thinking their rating is more realistic, at least for our usage.

Re: TangsFire 1000mAh 3.7V batteries

TomMac — Sun, 10 May 2015 23:06:06 GMT

I hope so... but not really kicking here as the Ultrafires made 45+days

Re: TangsFire 1000mAh 3.7V batteries

RobertRosal — Tue, 12 May 2015 03:31:30 GMT

I look forward to your results.

Re: TangsFire 1000mAh 3.7V batteries

jguerdat — Mon, 18 May 2015 12:43:05 GMT

Update - 300+ minutes recording with 2 bars now showing. Don't know exactly when 2 bars showed - had 72 minutes recorded yesterday when I wasn't at home. Seems better than the UltraFires which had ~230 minutes to 2 bars but I can't draw a real conclusion due to not knowing where in that 72 minutes the batteries tripped the 2 bar threshold.

Re: TangsFire 1000mAh 3.7V batteries

RobertRosal — Mon, 18 May 2015 14:04:27 GMT

jguerdat wrote:
Update - 300+ minutes recording with 2 bars now showing. Don't know exactly when 2 bars showed - had 72 minutes recorded yesterday when I wasn't at home. Seems better than the UltraFires which had ~230 minutes to 2 bars but I can't draw a real conclusion due to not knowing where in that 72 minutes the batteries tripped the 2 bar threshold.

Hi jguerdat,

Did those batteries arrive charged or did you fully charge them before using them?

Re: TangsFire 1000mAh 3.7V batteries

jguerdat — Mon, 18 May 2015 15:04:59 GMT

Every battery I've received was mostly but not fully charged. These were no exception.

Re: TangsFire 1000mAh 3.7V batteries

RobertRosal — Mon, 18 May 2015 15:09:38 GMT

Thanks, so far your results look promising!

Re: TangsFire 1000mAh 3.7V batteries

TomMac — Mon, 18 May 2015 17:22:37 GMT

@ jguerdat

when you get the rest of the data in, plse add to the other thread. tks Tom

Re: TangsFire 1000mAh 3.7V batteries

jguerdat — Mon, 18 May 2015 19:32:20 GMT

TomMac wrote:
@ jguerdat

when you get the rest of the data in, plse add to the other thread. tks Tom

Yes, dear. 😄

Btw, I'm Jeff which beats trying to spell my username.

Re: TangsFire 1000mAh 3.7V batteries

TomMac — Tue, 19 May 2015 01:56:22 GMT

Tks Honey.... I mean Jeff

Re: TangsFire 1000mAh 3.7V batteries

TomMac — Wed, 20 May 2015 16:18:52 GMT

jeff...

just found this info re Tangsfire.... actual capacity is about 700mahr.

- Brand: TangsFire
- Color: White
- Quantity: 4
- Type: Li-ion
- Model: 16340
- Mark Capacity: 1000mAh
- Actual Capacity: 700mAh
- Battery Voltage: 3.7V
- Rechargeable: Yes
- Great for flashlight and other products with 3.7V voltage
- Comes with a plastic box to protect batteries
- Packing list:
- 4 x Batteries
- 1 x Box

Re: TangsFire 1000mAh 3.7V batteries

jguerdat — Wed, 20 May 2015 17:28:07 GMT

The issue of capacity is more complex than it seems on the surface. The discharge curves I've seen vary widely according to drain level. The catch is, these cameras likely don't have linear discharge rates due to standby, recording (best quality vs. battery saving), IR illuminators and who knows what else. The best we can do is try various batteries until we can settle on a few likely suspects. So far, and this is highly speculative, I think the TangsFire batteries will work as well (or poorly, depending on your point of view) as either the UltraFires or GTLs. The main difference will likely be which is marked closer to actual results in these cameras.

Guess we just need a 'Murican company to start making some of these so we might have more recourse if ratings are off.

Re: TangsFire 1000mAh 3.7V batteries

TomMac — Wed, 20 May 2015 18:17:03 GMT

The issue of capacity is more complex than it seems on the surface. The discharge curves I've seen vary widely according to drain level.

How do u think the china made batteries get a 2300 mahr rate... prob a 5 ma draw! 🙂

Re: TangsFire 1000mAh 3.7V batteries

jguerdat — Wed, 20 May 2015 19:00:59 GMT

Maybe I was a bit quick comparing the TFs with the others. I now have 408 minutes and still on 2 bars. Of course, now that I've said that the batteries will die!

Right now, though, they're the winner since my others have run out at ~350 minutes worth of recording.

Re: TangsFire 1000mAh 3.7V batteries

RobertRosal — Wed, 20 May 2015 19:41:39 GMT

jguerdat wrote:
The issue of capacity is more complex than it seems on the surface. The discharge curves I've seen vary widely according to drain level. The catch is, these cameras likely don't have linear discharge rates due to standby, recording (best quality vs. battery saving), IR illuminators and who knows what else. The best we can do is try various batteries until we can settle on a few likely suspects. So far, and this is highly speculative, I think the TangsFire batteries will work as well (or poorly, depending on your point of view) as either the UltraFires or GTLs. The main difference will likely be which is marked closer to actual results in these cameras.

Guess we just need a 'Murican company to start making some of these so we might have more recourse if ratings are off.

It would be great to know how much draw the cameras are taking for each of the instances you have stated. With those facts and the discharge data that you can find for most rechargeable batteries out there. I believe It would help to narrow down a list of battery choices. At this point I am guessing on the idle, camera and night draws.

For me, I have actually chosen a rechargeable battery that is based on my own usage and rather than basing it on minutes, I am just going on days. Which is more prevalent to me and may not be for others.

Once I have completed my tests, I will share with the community the battery I am using. I would hate to prematurely recommend a battery and have it perform poorly for everyone.

Good or bad I will have my results for everyone to see.

Re: TangsFire 1000mAh 3.7V batteries

jguerdat — Wed, 20 May 2015 20:22:33 GMT

RobertRosal wrote:
For me, I have actually chosen a rechargeable battery that is based on my own usage and rather than basing it on minutes, I am just going on days. Which is more prevalent to me and may not be for others.

That's as good a measure as any. I use minutes simply because of the usage of one camera. My 350 minutes equates to about 60 days of normal use, meaning 4 minutes per day on average. My batteries have been in place for 23 and 12 days for the reports I've posted. Currently I have 12 days but over 400 minutes. I don't think many people want to see a battery that only lasts 12 days but when they understand how it was used, simple math gives them a better clue.

My other camera is much more the norm and I'll also report on its usage which should show whether the minutes or days, or both, will be the most useful guide. And a guide is all that it will ever be.